What is the typical value of VBE set in PNP Ge transistor?

What is the typical value of V_BE set in PNP Ge transistor?
1). 0.1 Volt
2). -0.3 Volt
3). -0.2 Volt
4). 0.2 Volt

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (5+1)
Submit:

Other Questions

1. A series resonant band-stop filter consists of a 68 Ω resistor, a 110 mH coil, and a 0.02 µF capacitor. The internal resistance, RW, of the coil is 4 Ω. Input voltage is 200 mV. Output voltage is taken across the coil and capacitor in series. What is the output voltage magnitude at f0?

2. Secondary air is the air used to

3. At parallel resonance, the line current is ___________

4. A 6 V battery output is divided down to obtain two output voltages. Three 2.2 kΩ resistors are used to provide the two taps. The two output voltages are

5. When the dielectric is homogeneous,the potential gradient is

6. The time constant and R-C circuit may also be defined as the time during which the charging current falls to ______ percent of its initial maximum value,

7. In case of three core flexible cable the color of the neutral is

8. In a TRF radio receiver, the RF and detection stages are tuned to ___________

9. A square wave has a period of 60 µs. The first odd harmonic is

10. The current due to electron flow in conduction band is the hole current in valence band.