In a low power factor wattmeter the pressure coil is connected

In a low power factor wattmeter the pressure coil is connected
1). To the supply side of the current coil
2). To the load side of the current coil
3). In any of the two meters at connection
4). None of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (2+3)
Submit:

Other Questions

1. The phase difference between voltage and current wave through a circuit element is given as 30°. The essential condition is that

2. A hysteresis motor works on the principle of

3. An amplifier using an opamp with slew rate SR=1v/sec has a gain of 40db.If this amplifier has to faithfully amplify sinusoidal signals from dc to 20KHz without introducing any slew-rate induced distortion, then the input signal level exceed

4. In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to

5. The output, V-I characteristics of an Enhancement type MOSFET has

6. To avoid formation of grooves in the commutator of a D.C. machine

7. The direction of magnetic lines of force is

8. For a stable system having two or more gain crossover frequencies the phase margin is measured at the highest crossover frequency.

9. In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will

10. The function of pole shoes in the case of D.C. machine is