A 20 mm diameter mild steel rod is chosen for the construction work according to the calculation results. The weight of the above rod per meter length will be

A 20 mm diameter mild steel rod is chosen for the construction work according to the calculation results. The weight of the above rod per meter length will be
1). 0.75 kg
2). 1.45 kg
3). 2.50 kg
4). 3.99 kg

---

Join Telegram Group

Other Questions

1. The portion of the building between the ground level and the ground floor is called

2. The amount of property in which a willing buyer to a willing seller for the property when neither one is under the compulsion to buy nor to sell is called ______.

3. The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is

4. Barometer is used to measure

5. The angle between skew back of a flat arch and the horizontal, is kept approximately equal to

6. For hydro-dynamically smooth boundary, the friction coefficient for turbulent flow is

7. Muller Breslau’s principle for obtaining influence lines is applicable toi) trussesii) statically determinate beams and framesiii) statically indeterminate structures, the material of which is elastic and follows Hooke’s lawiv) any statically indeterminate structureThe correct answer is

8. Which of the following statements is incorrect ?

9. The maximum bending moment due to a train of wheel loads on a simply supported girder

10. If A is the amplitude of particle executing simple harmonic motion, then the total energy E of the particle is