The plan of a building is in the form of a square with centreline dimensions of outer walls as 9.6 m × 14.6 m. If the thickness of the wall in superstructure is 0.40 m, then its plinth area is:
1). 100 m2
2). 150 m2
3). 200 m2
4). 250 m2
Given:$
Dimensions of outer walls = 9.6 m × 14.6 m.
Thickness of the wall = 0.40 m
Calculations:$
Plinth area of the building = $(\left( {9.6 + \frac{{0.40}}{2} + \frac{{0.40}}{2}} \right) \times \left( {14.6 + \frac{{0.40}}{2} + \frac{{0.40}}{2}} \right))$
Plinth area of the building = (10 × 15) = 150 m2$
1. Polar moment of inertia of a hollow shaft having D and d as outer and inner diameters, is given by:
2. Equivalent factor of passenger car unit (PCU) for a passenger car as per IRC is
3. What are the common methods of computing depletion charge?
4. Dilution method of disposing of sewage, is not preferred to
5. The rate of accumulation of sludge in septic tanks is recommended as
6. Kinematic viscosity is dependent upon
7. The term string is used for
8. 5 days-biochemical oxygen demand (BOD5) is taken at a temperature of
10. Which of the below is an example of semi rigid DPC material?