Suppose that you have a the maintenance package identifies several possible field replaceable units (FRUs) that will resolve the problem. What should you do after turning the power off?

Suppose that you have a the maintenance package identifies several possible field replaceable units (FRUs) that will resolve the problem. What should you do after turning the power off?

A).  Replace the indicated parts, one at a time in the recommended sequence, until the problem is resolved; return unused FRUs to stock

B).  Replace all of the indicated FRUs at once and return the machine to the customer if the problem is resolved

C).  Follow the same procedure as in ays replace the system board first if it is on the list of possible FRUs If multiple FRUs are indicated, then software is the most likely source of the problem

D).  None of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (1+5)
Submit:

Other Questions

1. What device prevents power interruptions, resulting in corrupted data?

2. In laser technology, what happens during the transfer stage?

3. A keyboard locks up intermittently even when replaced with a new keyboard. What is the LEAST likely cause of the problem?

4. Pick the correct choice for the 80386SXCPU.

5. What can you use to ensure power is not interrupted, resulting in corrupted data?

6. The ESD wrist strap is designed to protect PC Components or Service Technicians ?

7. When TRAP interrupt is triggered in an 8085 microprocessor, the program control is transferred to which one of the following?

8. The standard IRQ for the floppy drive is?

9. A microprocessor retrieves instructions from:

10. During preventative maintenance on a dot matrix printer, do NOT lubricate: