A universal RLC bridge uses

A universal RLC bridge uses

A).  Maxwell bridge configuration for measurement of inductance and De Santas bridge for measurement of capacitance

B).  Maxwell Wein bridge for measurement of inductance and modified De Santy™s bridge for measurement of capacitance

C).  Maxwell Wein bridge for measurement of inductance and Wein bridge for measurement of capacitance

D).  Any of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (5+2)
Submit:

Other Questions

1. How may satellite orbital slots are requested by the Philippine Government from ITU?

2. D.C. generators are connected to the bus-bars or disconnected from them only under the floating condition

3. In a FET, there are ___________ pn junctions at the sides

4. A 200 turn coil having an axial length of 30 mm and a radius of 10 mm is pivoted in a magnetic field having a flux density of 0.8 T. If the coil carries a current of 0.5 A, the torque acting on the coil will be[Hint. Torque = 2BIlNr N-m]

5. International ohm is defined in terms of the resistance of

6. Which is the correct order of sequence for representing the input values in K-map?

7. A ferrite core has less eddy current loss than an iron core because

8. A network which contains one or more than one source of e.m.f. is known as

9. Assertion (A): In FM the frequency of the carrier is varied by the modulating voltageReason (R): FM and PM are two forms of angle modulation.

10. The conductivity of a conductor can be increased by