If ground is applied to the (+) terminal of an inverting OP-amp, the (–) terminal will

If ground is applied to the (+) terminal of an inverting OP-amp, the (–) terminal will

A).  Not need an input resistor

B).  Be virtual ground

C).  Have high reverse current

D).  Not invert the signal

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (5+5)
Submit:

Other Questions

1. Five time constants are required for a capacitor to charge fully or discharge fully.

2. It is possible to increase the maximum range of a radar equipment by

3. An Aryton shunt is used to make a D'Arsonval galvanometer into a

4. The percentage limiting error, in the case of an instrument reading of 8.3 V with a 0 to 150 V voltmeter having a guaranteed accuracy of 1% full-scale reading is

5. For measurement of mutual inductance we can use

6. Piezoelectric materials serve as a source of ________ .

7. For faithful amplification by a transistor circuit, the value of VCE should ___________ for silicon transistor

8. When the frequency of the voltage applied to a series RC circuit is increased, the phase angle

9. A commutating rectifier consists of commutator driven by

10. A differential amplifier is invariably used in the i/p stage of all OP-amps. This is done basically to provide the OP-amps with a very high