If sampling is done at the rate of 10 kHz. The bandwidth required is

If sampling is done at the rate of 10 kHz. The bandwidth required is

A).  35 kHz

B).  70 kHz

C).  10 kHz

D).  1280 kHz

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (4+5)
Submit:

Other Questions

1. Low voltage at motor terminals is due to

2. A certain Wheatstone bridge has the following resistor values: R1 = 10 kΩ, R2 = 720 Ω, and R4 = 2.4 kΩ. The unknown resistance is

3. The collector of a transistor is ___________ doped

4. For high accuracy the meter has

5. An ideal OP-amp is an ideal

6. When a 1.6 kΩ resistor and a 120 Ω resistor are connected in parallel, the total resistance is

7. If an instrument has cramped scale for larger values, then it follows

8. If poles lie in first quadrant, damping ratio is

9. A low ratio of the ac to the dc load impedance of a diode detector results in

10. Binary vapor cycles are used to