Power factor of the system is kept high

Power factor of the system is kept high

A).  To reduce line losses

B).  To maximize the utilization of the capacities of generators, lines and transformers

C).  To reduce voltage regulation of the line

D).  Due to all above reasons

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (2+4)
Submit:

Other Questions

1. Platinum is used in

2. Point out the wrong statement. Magnetic leakage is undesirable in electric machines because it

3. If the steel disk in a crankshaft position sensor has stopped with the tab in the magnet's air gap, the induced voltage

4. It is desired to convert a 0-10 mA meter movement, with an internal resistance of 100 ohms, into a 0-1000 mA meter. The required value of shunt resistance is about

5. The most common device used as an LNA is

6. If two sinusoids of the same frequency but of different amplitudes and phase angles are subtracted, the resultant is

7. Which motor has the poorest speed control?

8. A conditionally stable system exhibits poor stability at

9. In the squirrel-cage induction motor the rotor slots are usually given slight skew

10. Which wave has the least form factor?