A series resonant band-pass filter consists of a 2 mH coil, a 0.005 µF capacitor, and a 120 Ω resistor. The winding resistance of the coil is 12 Ω. The output voltage is taken off the resistor. Input voltage is 12 Vrms. What is the output voltage magnitude at the center frequency (f0)?

A series resonant band-pass filter consists of a 2 mH coil, a 0.005 µF capacitor, and a 120 Ω resistor. The winding resistance of the coil is 12 Ω. The output voltage is taken off the resistor. Input voltage is 12 Vrms. What is the output voltage magnitude at the center frequency (f0)?

A).  10.9 V

B).  1.09 V

C).  1.1 V

D).  12 V

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (4+1)
Submit:

Other Questions

1. A change of 4% of supply voltage to an induction motor will produce a change of approximately

2. When a dielectric slab is introduced in a parallel plate capacitor, the potential difference between plates will

3. Locomotive having mono-motor bogies

4. The current coil of a wattmeter is connected to the CT of R-phase. The potential coil is connected across Y and B phases. The wattmeter measures

5. The ignited or auxiliary anode in mercury arc rectifier is made of

6. Induction heating process is based on which of the following principles?

7. A 120 Ω resistor must carry a maximum current of 25 mA. Its rating should be at least

8. Resistance grounding is used for voltage between

9. When a dielectric is placed in an electric field the field strength

10. A zener diode is destroyed if it___________