A voltmeter is connected in a ___________ with the circuit component across which potential difference is to be measured.

A voltmeter is connected in a ___________ with the circuit component across which potential difference is to be measured.

A).  Parallel

B).  Series

C).  Series or parallel

D).  None of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (4+2)
Submit:

Other Questions

1. One of the advantages of base modulation over collector modulation of a transistor class C amplifier is

2. The gravity controlled instrument has crowded scale because current is proportional to

3. The disc of an instrument using eddy current damping should be of

4. As the junction temperature increases, the voltage breakdown point for avalanche mechanism ___________

5. The purpose of capacitors in a transistor amplifier is to ___________

6. Two coils A and B have 200 and 400 turns respectively. A current of 1 A in coil A causes a flux per turn of 10-3 Wb to link with A and a flux per turn of 0.8 × 10-3 Wb through B. The ratio of self-inductance of A and the mutual inductance of A and B is

7. Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are

8. Permanent magnets are normally made of

9. The surge resistance of cable is

10. The location of AsiaSat I.