The purpose of stator winding in the compensated repulsion motor is to

The purpose of stator winding in the compensated repulsion motor is to

A).  provide mechanical balance

B).  improve power factor and provide better speed regulation

C).  prevent hunting in the motor

D).  eliminate armature reaction

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (3+2)
Submit:

Other Questions

1. At very low frequencies a series R-C circuit behaves as almost purely

2. A differential amplifier is invariably used in the i/p stage of all OP-amps.This is dome basically to provide the OP-amps with a very high

3. When the current through an inductor decreases, the amount of energy stored in the electromagnetic field

4. Transformer coupling is generally employed when load resistance is

5. The starting torque of a 3 phase squirrel cage induction motor is

6. According to application, instruments are classified as

7. Cylindrical windings using circular conductors, employed in transformers, are

8. Referring to the given circuit, what is ZTH if R1 is changed to 220 Ω?

9. An amplifier using an opamp with slew rate SR=1v/sec has a gain of 40db.If this amplifier has to faithfully amplify sinusoidal signals from dc to 20KHz without introducing any slew-rate induced distortion, then the input signal level exceed

10. Load carrying capacity of belt conveyor is about