Thermocouples are mainly used for the measurement of

Thermocouples are mainly used for the measurement of

A).  Temperature

B).  Resistance

C).  Eddy currents

D).  Coupling co-efficient

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (3+2)
Submit:

Other Questions

1. The e.m.f. generated in a D.C. generator is directly proportional to

2. In order to get maximum power transfer from a capacitive source, the load must have an impedance that is the complex conjugate of the source impedance.

3. If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will

4. The peak value of a sine wave is 200 V. Its average value is

5. The local oscillator of a broadcast receiver is tuned to a frequency higher than the incoming frequency

6. When an open circuit occurs in a parallel branch, the total resistance decreases.

7. Hunting in a synchronous motor cannot be due to

8. When the frequency of the source voltage decreases, the impedance of a parallel RC circuit

9. Which of the following is the advantage of electric braking?

10. A series resistance is connected in the zener circuit to___________