Sewer pipes are designed for maximum discharge with 25% to 33% vacant cross-sectional area for

Sewer pipes are designed for maximum discharge with 25% to 33% vacant cross-sectional area for

A).  Unexpected large scale infiltration of stream water

B).  Unexpected increase in the population

C).  Under estimates of maximum and average flows

D).  All of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (3+2)
Submit:

Other Questions

1. If tensile stress of a steel rod of diameter ‘D’ is 1400 kg/cm² and bond stress is 6 kg/cm², the required bond length of the rod is

2. The angular speed of a car taking a circular turn of radius 100 m at 36 km/hr will be

3. The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as

4. The intrinsic equation of catenary is

5. The thickness of each leaf of a cavity wall shall not be less than

6. The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of

7. In computing depreciation of an equipment, which of the following represents the first cost?

8. According to Whitney’s theory, ultimate strain of concrete is assumed to be

9. The minimum recommended diameter of sewers, is

10. The type of sewer which is suitable for both combined and separate system is