In majority of instruments damping is provided by

In majority of instruments damping is provided by

A).  fluid friction

B).  spring

C).  eddy currents

D).  all of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (4+2)
Submit:

Other Questions

1. Two voltmeters have the same range 0-400 V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600 V be applied across them, the readings are

2. A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be

3. The V-I characteristics for a triac in the first and third quadrants are essentially identical to those of ___________ in its first quadrant

4. Four resistors of equal value are connected in parallel. If the total voltage is 15 V and the total resistance is 600 Ω, the current through each parallel resistor is

5. The heated parts of an electrical machine dissipate heat into their surroundings by which of the followingmodes of heat dissipation ?

6. For crane travel which of the following motors is normally used?

7. Helical coils can be used on

8. In jaw crushers a motor has to often start against ________ load.

9. Depreciation charges are high in case of

10. When the frequency is decreased, the impedance of a parallel RL circuit