With zero volts on both inputs, an OP-amp ideally should have an output ___________

With zero volts on both inputs, an OP-amp ideally should have an output ___________

A).  equal to the positive supply voltage

B).  equal to the negative supply voltage

C).  equal to zero

D).  equal to CMRR

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (5+4)
Submit:

Other Questions

1. The leakage current in a pn junction is of the order of

2. For both lap and wave windings, there are as many commutator bars as the number of

3. The expansion method for evaluating determinants is

4. If the value of C in a series RLC circuit is decreased, the resonant frequency increases

5. Three capacitors each of the capacity C are given. The resultant capacity 2/3 C can be obtained by using them

6. ________ has the highest value of thermal conductivity.

7. In a D.C. machine stray loss is the sum of

8. A 120 Ω resistor is in parallel with a capacitor with a capacitive reactance of 40 Ω. Both components are across a 12 V ac source. What is the magnitude of the total impedance?

9. For a motor-generator set which of the following motors will be preferred?

10. A 5 mH, a 4.3 mH, and a 0.6 mH inductor are connected in parallel. The total inductance is