The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

A).  49.99 Ohms

B).  1/49.99 ohms

C).  1 Ohm

D).  2 Ohms

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (5+2)
Submit:

Other Questions

1. Which of the following methods is used to control speed of 25 kV, 50 Hz single phase traction?

2. Which of the following component is usually fabricated out of silicon steel?

3. The breakdown voltage of a cable depends on

4. Voltage leads current by 90° in a capacitor.

5. Which of the following statements is not necessarily correct for open control system ?

6. The maximum output voltage of a certain low-pass filter is 15 V. The output voltage at the critical frequency is

7. Suri transmission is

8. The knee voltage of a crystal diode is approximately equal to ___________

9. The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

10. The normal way to turn on a SCR is by ___________