_______ is a hard solder.

_______ is a hard solder.

A).  Tin-lead

B).  Tin-silver-lead

C).  Copper-zinc

D).  None of the above

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (2+1)
Submit:

Other Questions

1. In the cables, sheaths are used to

2. For three-phase induction motors which of the following is the least efficient method of speed control?

3. Which of the following features is not associated with Nichols chart?

4. In the transformer following winding has got more cross-sectional area

5. The following resistors (one each) are connected in a series circuit: 470 Ω, 680 Ω, 1 kΩ, and 1.2 kΩ. The voltage source is 20 V. Current through the 680 Ω resistor is approximately

6. In the case of PMMC rectifier type instruments, the deflecting torque is proportional to

7. Which of the following motors is used in tape-recorders ?

8. The purpose of RC or transformer coupling is to ___________

9. A resistor normally opens when it burns out.

10. High resistivity materials are used in