Pressure cables are generally not used beyond

Pressure cables are generally not used beyond

A).  11 kV

B).  33 kV

C).  66 kV

D).  132 kV

---

Join Telegram Group

Answer This Question
Name:
Email:
Answer :
Sum of (3+4)
Submit:

Other Questions

1. Nichol’s chart is symmetric about – 180° axis.

2. Form factor for a sine wave is

3. The active components in an IC are ___________.

4. A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is

5. If the doping level is increased, the breakdown voltage of the Zener ___________

6. If in a synchronous motor, driving mechanical load and drawing current at lagging power factor from constant voltage supply, its field excitation is increased, then its power factor

7. A milliammeter can be used as

8. A series resonant band-pass filter consists of a 2 mH coil, a 0.005 µF capacitor, and a 120 Ω resistor. The winding resistance of the coil is 12 Ω. The output voltage is taken off the resistor. Input voltage is 12 Vrms. What is the output voltage magnitude at the center frequency (f0)?

9. A certain regulator has a no-load voltage of 6 V and a full-load output of 5.82 V. What is the load regulation?

10. For given maximum axle load tractive efforts of AC. locomotive will be